Call Us Today: (800) 288-GURU

Guru Fans and Adaptors

Pit Viper (Medium) Fan - $72.00 sale: $44.00

The Pit Viper Power Draft Fan is best for ceramics, kettles and most backyard smokers.You can run medium size vertical smoker and extra large ceramic grills. Throttle the damper down for kettles, bullets, and smaller ceramic grills....

Pit Bull (Large) Fan - $105.00 sale: $64.00

The Pit Bull Power Draft Fan supplies a sufficient amount of air to wood and charcoal fires in BIG BBQ Pits such as large offsets, whole hog cookers, oil drum pits and more. The Pit Bull comes with a 6' lead wire so the fan and...

Ceramic Adaptor - $25.00 sale: $20.00

The new Ceramic Style Adaptor fits most medium to XL ceramic grills. The adaptor is rectangle and can be installed on the short or tall side depending on the height of your original damper slide. For adaptor slides that are 2-1/4”...

Weber (Small Universal) Adaptor - $25.00 sale: $20.00

This adaptor is made for all Weber grills and smokers and can also be used on small backyard offset smokers. This Inducer Sleeve and deflector plate can be mounted through a daisy wheel or attached through a hole 7/8”-1-1/4”. The Inducer...

Bulkhead Adaptor - $40.00

It's the one size fits all inducer. The Bulkhead Inducer can be mounted onto almost any cooker. The inducer will fit through insulated walls up to 2-1/8”: thick or as thin as 1/8” thick. To install simply use a step drill or hole...

Akorn Jr. Adaptor - $25.00

Introdcuing our newest adaptor for the Akorn Jr. This adaptor can work with any BBQ Guru PartyQ, DigiQ and CyberQ Cloud temperature control device and the Pit Viper fan system.

Broilking Adaptor - $40.00

This is a new adaptor we created at BBQ Guru that can be used with the Pit Viper fan and for the PartyQ, DigiQ and CyberQ

3/4" Threaded Adaptor - $25.00

This 3/4” threaded adaptor has been designed to screw into a 3/4” ball valve. If you have a smaller or larger ball valve, you can purchase a bushing to adapt to your size ball valve. Comes with high-temp silicone kill plug.

Small BGE Adaptor - $20.00

This door was designed to fit into the original small Big Green Egg draft door track with no modifications. It is easy to install and remove for easy clean-out. ***NOTE: If you have a medium, large or XL Big Green Egg, please choose...

1-1/2" Ball Valve Adaptor - $35.00

This adaptor consists of two parts. The 3/4” stainless threaded adaptor and a 1-1/2” to 3/4” bushing. Screw the bushing into the 1 1/2” ball valve (hand tight only) and screw the 3/4” threaded adaptor into the bushing. (hand tight...

2" Ball Valve Adaptor - $35.00

This is a two part adaptor made up of a stainless 3/4" threaded inducer tube and a 3/4" to 2" bushing. Thread the adaptor into a 2" ball valve. Make sure the ball valve is open all the way. Now you can push the BBQ Guru fan into the...

Vision Pro Adaptor S-Series - $25.00

This door was designed to fit the Vision Kamado Pro S-Series with no modifications. It is easy to install and remove. Comes with high-temp silicone kill plug.

Vision Pro Adaptor C-Series - $25.00

This door was designed to fit the Vision Pro C-series with no modifications. It is easy to install and remove. Comes with high-temp silicone kill plug.

Gateway Drum Smoker Adaptor - $30.00

This adaptor mounts to the top of your air intake pipe on the Gateway Drum Smoker.

Meadow Creek Adaptor - $25.00

Slide open the damper plate on the firebox. Place the Meadow Creek adaptor into the left side of the track with the BBQ GURU logo on the left and turn clockwise until the logo is right side up. Slide the adaptor all the way to...

Backwoods Adaptor - $40.00

Universal Backwoods Smoker Adaptor Door The Backwoods Smoker Adaptor Door is designed to clamp tightly over the existing damper door. In a matter of seconds you are ready to fire up your smoker and cook all night long. (Used on...

Big Steel Keg Adaptor - $25.00

This door was designed to fit into the draft door track with no modifications. It is easy to install and remove for easy clean-out. Comes with high-temp silicone kill plug.

Grill Dome Adaptor - $25.00

This door was designed to fit into the original Grill Dome draft door track with no modifications. It is easy to install and remove for easy clean-out. Comes with high-temp silicone kill plug.

XL Grill Dome Adaptor - $25.00

XL Grill Dome Adaptor Super Dome. Comes with high-temp silicone kill plug.

Char-Griller Akorn Adaptor - $25.00

This door was designed to fit into the Chargriller King Griller Kamado Kooker and Akorn door track. Comes with high-temp silicone kill plug.

1-3/8" Adaptor - $20.00

1-3/8” diameter stainless adaptor tube for Komodo Kamado cookers with a Guru ready port. This adaptor needs to be installed in the port with silicone glue to hold it in place. The newer Komodo Kamamdo models do not need an adaptor,...

Pitmaker Adaptor - $30.00

Pitmaker adaptor fits older Pitmaker models. Newer Pitmaker smokers take 2" ball valve adaptors. Comes with high-temp silicone kill plug.

Viking Ceramic Adaptor - $40.00

This adaptor is used on the Viking C-4 stainless encased ceramic cooker. Comes with high-temp silicone kill plug.

Browning Adaptor - $35.00

Fits the Browning Ceramic Grill. Comes with high-temp silicone kill plug.

Pit Boss Ceramic Adaptor - $25.00 sale: $20.00

The new Pit Boss Adaptor fits the ceramic style Pit Boss cookers.